Description
Same thorough screening as our airport body scanner; now wirh a modular design for quick set-up
Traveler ships to event sites in three rugged containers. Installation requires only about 15-minutes by a single technician plus an on-site helper. Electrical power is provided by a standard electrical outlet, or by an optional bateery pack lasting up to 12 hours.
Triple-mode screening provides the utmost in threat detection: Backscatter examines the front and rear of the body; Forward-Scan the sides and loose clothing; and Ground-Level for the ankles and feet. Quickly and reliably finds firearms, explosive and improvised threats.
Traveler Specifications
Physical Operation
Footprint: 50″ x 62″ (127 x 158 cm)
Height: 80″ (203 cm)
Weight: 450 lbs (205 kg)
Transport
1 Crate: 50″ x 23″ X 45″ high (127 x 58 x 114 cm)
300 lbs (136 kg)
2 Crates: 54″ x 25″ x 48″ high (137 x 63 x 122 cm)
200 lbs (91 kg)
Electrical
Power: 100/120/230 VAC, 50/60Hz, 600 watt tolerant of poorly regulated power
EMI/RFI: Tested to FCC Part 15
Safety: Certified to UL61010-1
Environmental
Operating: 32-120°F (0-50°C)
Humidity: Less than 95%, noncondensing
Radiation Safety
Dose: 5uRem (0.05 uSv) per screening, effective dose to subject measured in accordance with ANSI/HPS N43-17-2009
Leakage: <0.1 mR(1 uGy) in any 1 hour at the footprint of the scanner.
Standards: Complies with the ANSI/HPS N43.17-2009 radiation safety standard; and the IEEE N42.47-2010 performance standard
Screening
Scan rate: Up to 200 persons per hour. Dual pose operation: 5 second scan on front, subject turns, 5 second scan on rear, ATD requires less than 1 second to display
Detection: Broad range of metallic and non-metallic threats; contact Tek84 for testing results
